Federal Pacific panel in your inspection report: should you still buy the house?
If your inspection report flags a Federal Pacific panel, it means the house has an older electrical panel whose Stab-Lok breakers have a long record of safety concerns, and the inspector recommends having an electrician look at it. You can usually still buy the house, but plan for replacing the panel and get a real estimate before your inspection deadline. Here’s what it means and what to do.
What a Federal Pacific panel is
The electrical panel (or breaker box) is where power comes into the house and splits into circuits. Each circuit has a breaker, a switch that should trip and cut the power if too much current flows, for example from an overloaded circuit or a short.
Federal Pacific Electric, often shortened to FPE, made panels with breakers sold under the name Stab-Lok. According to an insurer’s safety bulletin, they were made from the 1950s into the 1980s. The Columbus, Indiana Fire Department says they’re most commonly found in homes and businesses built before 1990, and suggests looking for the name “Stab-Lok” printed inside the breaker area.
Inspectors word this finding in a few ways. They all point to the same thing:
- “Federal Pacific Electric (FPE) panel with Stab-Lok breakers”
- “FPE panel noted; recommend further evaluation by a licensed electrician”
Why inspectors flag Federal Pacific panels
The concern is that some of these breakers may not trip when they should. A breaker that stays on during an overload lets current keep flowing, which can heat up wiring and create what one insurer calls “hot spots.”
The U.S. Consumer Product Safety Commission (CPSC) investigated Stab-Lok breakers starting in 1980, focusing mainly on two-pole breakers made before 1979. Its own testing confirmed those breakers failed certain Underwriters Laboratories (UL) calibration tests. In 1983 it closed the investigation without deciding whether the breakers were safe or not, saying it couldn’t link the test failures to a hazard and that gathering more data would cost several million dollars it didn’t have in its budget.
Because that question was never settled, many inspectors flag these panels whenever they see one, even if everything seems to be working.
Property Made Clear turns inspection reports into a calm, plain-English summary, sorted by what to handle first.
Is a Federal Pacific panel dangerous?
There’s no official finding that every FPE panel is unsafe. But the concern is real enough that safety groups take it seriously. The Columbus, Indiana Fire Department warns of a potential fire risk and recommends replacing these panels, or talking to a licensed electrician about replacement options. An insurer’s safety bulletin calls having a licensed electrician remove and replace them a best practice.
The calm way to think about it: a panel that’s working today doesn’t mean the house is unsafe to live in tomorrow, but you can’t easily test whether its breakers would trip in a real overload. That uncertainty is why it makes sense to plan to replace it rather than wait. If you ever notice a breaker that’s hot, buzzing or scorched, call an electrician right away.
Should you still buy a house with a Federal Pacific panel?
Usually, yes, if you like the house and plan for the cost. A panel is a known, fixable item, not a sign that the whole house is in poor shape. It belongs in the same group as other safety items, not with the problems that make buyers walk away. Our guide to red flags vs. normal wear explains how to tell them apart.
Before your deadline, do three things:
- Have a licensed electrician look at it. Ask them to check the panel and the wiring around it, and to give you a written estimate for replacement.
- Call your insurance agent. Ask whether the panel affects your coverage or price, so there are no surprises at closing.
- Decide what to ask the seller for. A replacement before closing, a credit, or a lower price.
What it usually costs to fix
Replacing a panel is a bigger job than most electrical fixes, so it’s worth getting a real number. We haven’t found a trustworthy national price to quote, and electrical rates vary a lot from one area to another, so a local estimate is the only number worth putting in a repair request.
What usually drives the price:
- Whether it’s a straight panel swap, or the electrician recommends upgrading the whole electrical service.
- The number of circuits, and whether older wiring connected to the panel needs work.
- Where the panel and meter are, and how easy they are to reach.
- Local permit and inspection fees, and coordinating with the utility to disconnect and reconnect power.
Who to call
A licensed electrician. Panel work involves the main power coming into the house and is never a DIY job. If the report lists other electrical items, such as a double-tapped breaker, ask the same electrician to look at everything in one visit.
If your agent shared a Property Made Clear summary, you can tap Get quote on this item to request free, no-obligation estimates from local electricians. You can see how findings look in a summary on the example report.
What to do as a buyer
Put it on your list of safety items and bring an electrician’s estimate to your agent. A clear way to word it in your repair request: “Seller to have a licensed electrician replace the Federal Pacific electrical panel, with any required permit and the invoice provided before closing.” Or, if you’d rather choose the electrician yourself: “Seller to credit buyer [amount] toward closing costs, per the attached estimate.”
If you’re feeling overwhelmed by the rest of the report, our guide on how to read a home inspection report helps you sort the serious items from the routine ones.
- Commission Closes Investigation of FPE Circuit Breakers and Provides Safety Information for Consumers (U.S. Consumer Product Safety Commission, 1983, revised 2011)
- Federal Pacific Electrical Panels Pose Fire Risk (City of Columbus, Indiana Fire Department)
- Potential Dangers of Federal Pacific Electric Stab-Lok Breakers and Panels (Acadia Insurance, PDF)
This guide is general information, not professional advice. For anything specific to your home, talk with your home inspector or a licensed professional.