How to turn an inspection report into a repair request
To turn an inspection report into a repair request, pick the few findings that matter to your buyer, write each one so there’s no doubt about what you’re asking, and back the bigger items with real estimates. Here’s how to do it step by step, before the inspection deadline runs out.
What a repair request is, and what your state calls it
After the inspection, the buyer’s agent sends the listing agent a written list of what the buyer wants the seller to fix, or pay for, before closing. The seller can agree, counter or say no, and the buyer decides what to do from there. It has to go out before the inspection or due diligence deadline in the contract.
Every state and association uses its own form and name for it. A few common ones:
- California
- Request for Repair (C.A.R. Form RR)
- Arizona
- Buyer’s Inspection Notice and Seller’s Response, known as the BINSR
- Colorado
- Inspection Objection Notice, then an Inspection Resolution once you agree
- Texas
- Amendment to Contract (TREC 39), usually during the option period
- North Carolina
- Due Diligence Request and Agreement (Form 310-T)
- Washington
- Inspection Response (Form 35R)
Use the form your contract calls for, and check with your broker if you’re not sure. The list you build below is what goes into it.
Choose the items: short beats long
A 60-page report can easily list 40 or more findings. Asking for all of them tells the seller you’re nitpicking, and they may push back on everything. A short list of items that clearly matter is easier to say yes to.
Sit down with your buyer and start with three groups:
- Safety items. Anything that could hurt someone: a missing water heater discharge pipe, a double-tapped breaker, no carbon monoxide detector, a loose stair railing.
- Big-ticket items. Roof, foundation, drainage, heating and cooling, plumbing leaks. These drive the money conversation.
- Items marked “further evaluation.” If the inspector called for a specialist, either get that specialist out before the deadline or ask the seller to.
Routine upkeep, cosmetic issues and anything the buyer knew about when they made the offer usually stay off the list. If your buyer is torn, ask: would most buyers ask for this? If yes, it probably belongs.
A plain-English summary of the inspection, sorted by priority, with your notes and every item linked to its page.
Decide: repair, credit or price reduction
Make this choice item by item, not for the whole list. Our guide to repair request vs. credit goes deeper on when each one fits and how to word it.
- Ask for a repair when the item is a safety issue or something the buyer needs working on move-in day. Ask for a licensed professional, and for receipts or invoices before closing.
- Ask for a credit when the buyer would rather pick the contractor and control the quality, or when the work can’t be finished before closing. Credits need a number, which is where estimates come in.
- Ask for a lower price for very large items, like a roof replacement, especially if the credit would go over the loan’s limit.
Best when: Safety items, or anything the buyer needs working on move-in day.
Ask for a licensed pro and receipts before closing.
Best when: The buyer wants to pick the contractor, or the work can’t be done before closing.
Needs a number: get estimates first. Check the lender’s limits.
Best when: Very large items, like a roof replacement.
Useful when a credit would go over the loan’s limit.
Check with the lender before promising a credit. Loans limit how much the seller can contribute and what it can pay for. For a conventional loan that follows Fannie Mae’s rules, seller contributions on a primary home are capped at 3% of the price when the buyer puts down less than 10%, 6% with 10% up to 25% down, and 9% with 25% or more down. They can only go toward closing costs, not straight to repairs. FHA, VA and other loans have their own rules.
Write each item so there’s no doubt
Vague requests cause the most trouble later. “Fix the plumbing items on page 5” lets the seller choose who does the work and how. North Carolina’s Real Estate Commission has warned about exactly this: list items clearly enough that both sides agree on what will be done, how, by whom and by when.
For each item, include:
- A short, plain description of the problem.
- Where it is in the report: the page number, and the inspector’s wording if it helps.
- What you’re asking for: a repair by a licensed pro, a credit for a set amount, or further evaluation.
- Proof you’ll want: receipts, invoices or a re-inspection before closing.
1. Water heater has no discharge pipe on its pressure-relief valve (report page 5). Seller to have a licensed plumber install the discharge pipe and a catch pan, with invoice provided before closing.
2. Double-tapped breaker in the main electrical panel (report page 8). Seller to have a licensed electrician correct it, with invoice provided before closing.
3. Radon level above the EPA action level (report page 12). Seller to credit buyer $1,400 toward closing costs, per the attached mitigation estimate.
Keep the tone factual. You’re describing what the inspector found, not judging the seller’s upkeep, and a calm request keeps the deal friendly.
Get estimates before you send it
A request that says “credit $1,400, per the attached estimate” is much harder to dismiss than “credit for radon mitigation.” Real numbers keep both sides from guessing, help the seller compare a credit with doing the work, and protect your buyer from asking for too little.
Deadlines are short, so ask for estimates the day the report arrives, starting with the biggest items (see how to get repair estimates before the inspection deadline). Even one or two estimates on the costly items make the whole request stronger. Rough numbers from the internet or an AI chat are a starting point, not something to put in a contract.
After you send it
The seller usually has a few days to respond, depending on the contract. Expect one of three answers:
- Yes: put the agreement in writing on the right form, and calendar the repair and proof deadlines.
- A counter: often a credit instead of repairs, or some items but not others. Go back to your buyer’s priorities.
- No: your buyer decides whether to go ahead, renegotiate or use their contract rights before the deadline.
Before closing, check the agreed work at the final walk-through and collect the receipts. If your buyer wants a re-inspection of a major repair, build that into the agreement.
A faster way to get there
Property Made Clear helps with the two slowest parts. Upload the inspector’s PDF and your buyer gets a plain-English summary on their phone, sorted into before-closing priorities, first-year items and routine upkeep, with every item linked to its page in the report. That’s most of your shortlist, with page numbers, done for you.
Your buyer can also tap Get quote on any item, or on all the priorities at once, and local pros reach out with free, no-obligation estimates, in time to put real numbers in the request. It’s free for agents. See an example summary or read how it works for agents.
- B3-4.1-02, Interested Party Contributions (Fannie Mae Selling Guide)
- Avoid Vaguely Written DDRAs (North Carolina Real Estate Commission)
- The BINSR: Arizona’s form for negotiating repairs
- Colorado Inspection Objection and Inspection Resolution forms (Vaned)
- Addendum for repairs in Texas (HAR.com)
- Form 35R, Inspection Response (The Madrona Group)
This guide is general information, not professional advice. For anything specific to your home, talk with your home inspector or a licensed professional.